HyperX Fury 16GB 2666MHz DDR4 CL16 DIMM Black Single RAM
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.3425” (34.1mm), w/heatsink
HyperX HX426C16FB4/16 is a 2G x 64-bit (16GB) DDR4-2666
CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based
on eight 2G x 8-bit FBGA components per module. Each module
supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0.
Each module has been tested to run at DDR4-2666 at a low latency
timing of 16-18-18 at 1.2V. Additional timing parameters are
shown in the Plug-N-Play (PnP) Timing Parameters section
below. The JEDEC standard electrical and mechanical
specifications are as follows:
CL(IDD): 16 cycles
Row Cycle Time (tRCmin): 45.00ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.)
Row Active Time (tRASmin): 27.00ns(min.)
UL Rating: 94 V – 0
Operating Temperature: 0 C to +85 C
Storage Temperature: -55 C to +100 C
| Weight | 0.5 kg |
|---|
You must be logged in to post a review.
Reviews
There are no reviews yet.