• Kingston ValueRAM 8GB 1600MHz DDR3 CL11 DIMM Single RAM

      6.7% ر.س 15ر.س 209

      • JEDEC standard 1.5V  Power Supply • VDDQ = 1.5V • 800MHz fCK for 1600Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL – 2, or CL – 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional…

    • Klevv Cras XR 8GB DDR4 U-DIMM 4266Mhz OC/Gaming memory

      Key Features Unique Design for RGB LED bar RGB Lighting Support XMP 2.0 One-step Overclocking System Compatibility Rigorous Test for High Quality

    • Klevv Cras XR 8GB DDR4 U-DIMM 4000Mhz OC/Gaming memory

      Key Features Unique Design for RGB LED bar RGB Lighting Support XMP 2.0 One-step Overclocking System Compatibility Rigorous Test for High Quality

    • Klevv Cras XR 16GB DDR4 U-DIMM 4000Mhz OC/Gaming memory

      Key Features Unique Design for RGB LED bar RGB Lighting Support XMP 2.0 One-step Overclocking System Compatibility Rigorous Test for High Quality

    • Klevv Cras XR 32GB(2x16GB) DDR4 U-DIMM 4000Mhz OC/Gaming memory

      Key Features Unique Design for RGB LED bar RGB Lighting Support XMP 2.0 One-step Overclocking System Compatibility Rigorous Test for High Quality

    • Klevv Cras XR 8GB DDR4 U-DIMM 3600Mhz OC/Gaming memory

      Key Features Unique Design for RGB LED bar RGB Lighting Support XMP 2.0 One-step Overclocking System Compatibility Rigorous Test for High Quality

    • Klevv Bolt XR 32GB(2x16GB) DDR4 U-DIMM 4000Mhz OC/Gaming memory

      Key Features Support: Support Intel XMP(Extreme Memory Profile) 2.0 for one-click ovclocking Power: Reduced voltage & ultra-lower power consumption Reliability: Rigorous test procedure to ensure highest quality and reliability Compatibility: QVL approved and compatible with mainstream motherboards

    • Klevv Bolt XR 16GB(2x8GB) DDR4 U-DIMM 4000Mhz OC/Gaming memory

      Key Features Support: Support Intel XMP(Extreme Memory Profile) 2.0 for one-click ovclocking Power: Reduced voltage & ultra-lower power consumption Reliability: Rigorous test procedure to ensure highest quality and reliability Compatibility: QVL approved and compatible with mainstream motherboards

    • Klevv Bolt XR 8GB DDR4 U-DIMM 4000Mhz OC/Gaming memory

      Key Features Support: Support Intel XMP(Extreme Memory Profile) 2.0 for one-click ovclocking Power: Reduced voltage & ultra-lower power consumption Reliability: Rigorous test procedure to ensure highest quality and reliability Compatibility: QVL approved and compatible with mainstream motherboards

    • Klevv Bolt X 8GB DDR4 U-DIMM 3600Mhz OC/Gaming memory

      KEY FEATURES Performance Enhancing Best-in-class Memory Chips Aluminum Heat Spreader Ecosystem Compatibility One-step Overclocking

    • Kingston ValueRAM 8GB 2666MHz DDR4 CL19 DIMM Single RAM

      35.2% ر.س 44ر.س 81

      • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 8 internal banks; 2 groups of 4 banks each • Fixed burst chop (BC) of 4 and…

    • Kingston ValueRAM 8GB 1600MHz DDR3L CL11 SODIMM Single RAM

      5.2% ر.س 11ر.س 199

      • JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply • VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) • 800MHz fCK for 1600Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL – 2, or CL – 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does…

    • Kingston ValueRAM 16GB 3200MHz DDR4 CL22 DIMM Single RAM

      • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and…

    • Kingston ValueRAM 8GB 2666MHz DDR4 CL19 SODIMM Single RAM

      • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 8 internal banks; 2 groups of 4 banks each • Fixed burst chop (BC) of 4 and…

    • Kingston ValueRAM 4GB 2666MHz DDR4 CL19 DIMM Single RAM

      • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 8 internal banks; 2 groups of 4 banks each • Fixed burst chop (BC) of 4 and…

    • HyperX Fury 16GB 2666MHz DDR4 CL16 DIMM Black Single RAM

      10.6% ر.س 40ر.س 339

      • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • On-Die termination (ODT) • 16 internal banks; 4 groups of 4 banks each • Bi-Directional Differential Data Strobe • 8 bit pre-fetch • Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) • Height 1.3425” (34.1mm), w/heatsink

    Start typing and press Enter to search

    Shopping Cart

    No products in the cart.